DT FOAM

composition:
Sodium Hydroxide - 5.0%
Potassium Hydroxide - 2.0%
Glucopyranose, Oligomeric, C10-16 (Even numbered) -
Alkyl Glycosides - 4.8%

label:
Foaming alkaline based cleaning liquid. Suitable for cleaning surfaces, tools
Transportation for transporting animals and equipment is dirty and covered a lot
organic dirt. in agricultural buildings only.
Prohibited for use in animal food factories!
Suitable for removing food residues and stains, fats and proteins.
without the presence of animals
Not for human consumption!
in the license of the veterinary services of the Ministry of Agriculture
Number 1606
For veterinary use only
Not for home use

Content:
25 KG

Read all instructions carefully before use
in the preparation.

Human warnings:
The product is corrosive. Causes severe skin burns and severe eye damage, harmful if swallowed, may cause respiratory irritation.
Safety and protection measures:
When using the product, use long clothes with a chemical-resistant coverall over them, work shoes, rubber gloves of the type
With integrated filter (EN-140 standard) Half-face mask (EN-166 standard) Protective glasses (EN-374/3 standard) PE/PCV
for respiratory protection. During the application it is forbidden to eat, smoke and drink. ABEK2P3 filter level (EN-14387

Risks to the environment:
Don't pollute water reservoirs. The preparation is very toxic to the aquatic environment and aquatic creatures. Do not drain or pour the preparation
The concentrated and diluted to the sewer and the environment. It is forbidden for the product to reach water reservoirs and streams.

User manual:
Before use, fodder must be kept away from the building and treated vehicles.
DT foam can be used to clean small equipment before using a disinfectant. The cleaning operation is done by soaking
and according to the prescribed dose. Small equipment should be soaked in the solution for at least 15 to 30 minutes. At the end of the treatment, the equipment must be washed
in drinking water before using a disinfectant.
Application of the preparation including soaking small equipment must be done without the presence of animals nearby.
Do not wet the treated surface before using the preparation.
The preparation should be shaken before use and the foam should be sprayed on the treated surface from top to bottom.
The preparation should be left on the treated surface for 15 to 30 minutes.
The preparation must be washed with drinking water quality using a high pressure hose.
Do not mix the product with any other preparation! The preparation is prohibited for use in animal food factories
DT foam can be corrosive. Do not use on aluminum!

Dosages:
For cleaning stables, agricultural buildings, equipment, vehicles for transporting animals.
As a cleaning agent: 1% to 2% (from 1:100 to 1:50) depending on the nature of the surface and the level of dirt.
to create a lot of foam. P>50BAR to create some foam. or at high pressure, P<5 BAR low pressure surface spraying
1%), on surfaces with a lot - dilute the DTI foam at a rate of 1-2 liters of preparation per 100 liters of water (2%
Dirt can be diluted less.
Apply the solution to the surfaces and spray 200 to 300 ml per square meter depending on the porosity of the surface.
To work with a spray tank, fill the tank with 2 liters of DT foam for every 100 liters of water and spray with the foaming rod.
For maximum cleaning use a lot of high pressure foam and a long contact time.
Detergents for soaking small equipment
The dose of DT foam is 2%
Treatment of spilled concentrated product:
Collect the product (concentrated or diluted) spilled with absorbent material such as dry sand, vermiculite, diatomaceous earth. must be transferred
the contaminated preparation into the waste container. Contact the hazardous materials disposal site.
Then wash the contaminated area with plenty of water. Do not pollute water sources and prevent the preparation from entering the sewers.
The preparation is very dangerous and toxic to aquatic animals and it must be ensured that it does not reach water reservoirs.

storage:
The preparation must be stored in the original packaging in a cool, shaded, locked place, intended for storing chemical preparations, out of reach
The hand of children and other people who are not authorized to use a toxic preparation.

Handling of empty packages:
Wash the package three times with tap water and add the rinse water to the spray in the sprayer tank. should be pierced
the empty packages and throw them in the trash can.

First aid and doctor information:
1. In case of contact with the skin (or hair) - immediately remove all contaminated clothes, shoes, watch and wash thoroughly
Any skin that is exposed to the preparation with plenty of running water and seek medical attention immediately.
2. In case of eye contact, wash with lukewarm running water for at least 15 minutes. Contact lenses should be removed
and continue to wash when the victim's eyelids must be opened. Contact an ophthalmologist immediately and show this label.
3. In case of ingestion - do not induce vomiting. Do not bathe the victim. Seek medical attention immediately.
4. In case of inhalation - if the victim has difficulty breathing, move him to fresh air and leave him at rest in a comfortable position for breathing.
* For more information: The National Center for Medical Information in Harelat, Rambam Hospital Haifa, phone 04-7771900
* In case of evacuation for medical help, this label must be shown to the doctor!
Expiry date of the product: Batch number:
France Importer: MPOT Ltd. P.O. Box 5465 Herzliya Huvepharma SA: Manufacturer
Label update date 301220 Registration validity in Shot
Do not use the preparation after the last date for use that appears on the package
The veterinary services state that incorrect use of the product, not according to the instructions on the label, may harm the user, the owner
life, is dangerous to public health and the environment and constitutes an offense against the law__